Tubes The impressive Luxura X10 is available in two different models with 46 or 52 tanning tubes. Within these models, there is also a choice of variants. The tubes measure 2 metres in the base, which means that no shoulder reflectors are required and a full-body tan is guaranteed. Four powerful high-pressure face tanners have been incorporated into the canopy (4 x 520 watts). You can choose between SLi or SLi+ in an optional combination with HPS Filters. | |  Dimensions
Although the Luxura X10 is a wonderfully spacious sunbed, it takes up far less room than you might think. The total length of the sunbed is put to optimal use, which means it is not ‘too' big. The X10 can even be put right up against the wall without any loss of space. The visual picture is made complete by the attractive design. Download PDF |
|  Ventilation
With the Luxura X10, you can choose from three central exhaust systems. The standard system is a well-finished steel housing in attractive anthracite grey. It is mounted at a low level behind the sunbed with a pipe (Ø 300 mm diameter). The second variant is a little more luxurious: the air tower. This stylish element stands behind the appliance. Extraction to the top or the rear is also possible with a Ø 300 mm pipe. The ultimate luxury and optimal energy consumption are obtained with the air tower with unique WRS system. In this case, you can reuse the heat of the appliance via an air recovery system which you can adjust either manually or by means of a thermostat. |
© Hapro International 
P.O. Box 73